Network File System (NFS) is a distributed file system protocol that allows you to share remote directories over a network. With NFS, you can mount remote directories on your system and work with the files on the remote machine as if they were local files.
NFS protocol is not encrypted by default and unlike Samba, it does not provide user authentication. Access to the server is restricted by the clients IP addresses or hostnames.
In this tutorial, we’ll go over how to set up an NFSv4 Server on LinuxMint 19. We’ll also show you how to mount an NFS file system on the client.
This example assumes that you have one server running LinuxMint 19 and another one running any other Linux distribution. The server and the clients should be able to communicate with each other over a private network. If your hosting provider doesn’t offer private IP addresses, you can use the public IP addresses and configure the server firewall to allow traffic on port
2049 only from trusted sources.
The machines in this example have the following IPs:
NFS Server IP: 192.168.33.10 NFS Clients IPs: From the 192.168.33.0/24 range
Set Up the NFS Server
We’ll start by installing and configuring the NFS server.
Installing the NFS server
Refresh the packages index and install the NFS server package:
sudo apt update sudo apt install nfs-kernel-server
By default, on LinuxMint 19 NFS version 2 is disabled. Versions 3 and 4 are enabled. You can verify that by running the following
sudo cat /proc/fs/nfsd/versions
-2 +3 +4 +4.1 +4.2
NFSv2 is pretty old now, and there is no reason to enable it.
NFS server configuration options are set in
/etc/default/nfs-common files. The default settings are sufficient in our case.
Creating the file systems
When configuring an NFSv4 server it is a good practice is to use a global NFS root directory and bind mount the actual directories to the share mount point. In this example, we will use the
/srv/nfs4 director as NFS root.
We’re going to share two directories (
/opt/backups), with different configuration settings, to better explain how the NFS mounts can be configured.
/var/www/ is owned by the user and group
/opt/backups is owned by
Create the export filesystem using the
sudo mkdir -p /srv/nfs4/backups sudo mkdir -p /srv/nfs4/www
Mount the actual directories:
sudo mount --bind /opt/backups /srv/nfs4/backups sudo mount --bind /var/www /srv/nfs4/www
To make the bind mounts permanent, open the
sudo nano /etc/fstab
and add the following lines:
/opt/backups /srv/nfs4/backups none bind 0 0 /var/www /srv/nfs4/www none bind 0 0
Exporting the file systems
The next step is to define the file systems that will be exported by the NFS server, the shares options and the clients that are allowed to access those file systems. To do so open the
sudo nano /etc/exports
/etc/exportsfile also contains comments that describe how to export a directory.
In our case we need to export the
backups directories and allow access only from clients on the
/srv/nfs4 192.168.33.0/24(rw,sync,no_subtree_check,crossmnt,fsid=0) /srv/nfs4/backups 192.168.33.0/24(ro,sync,no_subtree_check) 192.168.33.3(rw,sync,no_subtree_check) /srv/nfs4/www 192.168.33.110(rw,sync,no_subtree_check)
The first line contains
fsid=0 which defines the NFS root directory
/srv/nfs. The access on this NFS volume is allowed only to the clients from the
192.168.33.0/24 subnet. The
crossmnt option is required to share directories that are sub-directories of an exported directory.
In the second line shows how to specify multiple export rules for one filesystem. It exports the
/srv/nfs4/backups directory and allows only read access to the whole
192.168.33.0/24 range and both read and write access to
sync option tells NFS to write changes to disk before replying.
The last line should be self-explanatory. For more information about all the available options type
man exports in your terminal.
Save the file and export the shares:
sudo exportfs -ra
You need to run the command above each time you modify the
/etc/exports file. If there are any errors or warnings they will be shown on the terminal.
To view the current active exports and their state, use:
sudo exportfs -v
The output will include all shares with their options. As you can see there are also options that we haven’t define in the
/etc/exports file. Those are default options and if you want to change them you’ll need to explicitly set those options.
/srv/nfs4/backups 192.168.33.3(rw,wdelay,root_squash,no_subtree_check,sec=sys,rw,secure,root_squash,no_all_squash) /srv/nfs4/www 192.168.33.110(rw,wdelay,root_squash,no_subtree_check,sec=sys,rw,secure,root_squash,no_all_squash) /srv/nfs4 192.168.33.0/24(rw,wdelay,crossmnt,root_squash,no_subtree_check,fsid=0,sec=sys,rw,secure,root_squash,no_all_squash) /srv/nfs4/backups 192.168.33.0/24(ro,wdelay,root_squash,no_subtree_check,sec=sys,ro,secure,root_squash,no_all_squash)
root_squash is enabled by default. This is one of the most important options concerning NFS security. It prevents root users connected from the clients to have root privileges on the mounted shares. It will map root
In order for the users on the client machines to have access, NFS expects the client’s user and group ID’s to match with those on the server. Another option is to use the NFSv4 idmapping feature that translates user and group IDs to names and the other way around.
That’s it. At this point, you have set up an NFS server on your LinuxMint server. You can now move to the next step and configure the clients and connect to the NFS server.
If you run a firewall on your network, you’ll need to add a rule that will enable traffic on the NFS port.
Assuming you are using
UFW to manage your firewall to allow access from the
192.168.33.0/24 subnet you need to run the following command:
sudo ufw allow from 192.168.33.0/24 to any port nfs
To verify the change run:
sudo ufw status
The output should show that the traffic on port
2049 is allowed:
To Action From -- ------ ---- 2049 ALLOW 192.168.33.0/24 22/tcp ALLOW Anywhere 22/tcp (v6) ALLOW Anywhere (v6)
Set Up the NFS Clients
Now that the NFS server is setup and shares are exported the next step configure the clients and mount the remote file systems.
You can also mount the NFS share on macOS and Windows machines but we will focus on Linux systems.
Installing the NFS client
On the client machines we need to install only the tools required to mount a remote NFS file systems.
- Install NFS client on LinuxMint/Debian/Ubuntu
The name of the package that includes programs for mounting NFS file systems on Debian based distributions is
nfs-common. To install it run:
sudo apt update sudo apt install nfs-common
- Install NFS client on CentOS and Fedora
On Red Hat and its derivatives install the
sudo yum install nfs-utils
Mounting file systems
We’ll work on the client machine with IP
192.168.33.110 which has read and write access to the
/srv/nfs4/www file system and read only access to the
/srv/nfs4/backups file system.
Create two new directories for the mount points. You can create this directories at any location you want.
sudo mkdir -p /backups sudo mkdir -p /srv/www
Mount the exported file systems with the
sudo mount -t nfs -o vers=4 192.168.33.10:/backups /backups sudo mount -t nfs -o vers=4 192.168.33.10:/www /srv/www
192.168.33.10 is the IP of the NFS server. You can also use the hostname instead of the IP address but it needs to be resolvable by the client machine. This is usually done by mapping the hostname to the IP in the
When mounting an NFSv4 filesystem, you need to ommit the NFS root directory, so instead of
/srv/nfs4/backups you need to use
Verify that the remote file systems are mounted successfully using either the mount or
The command will print all mounted file systems. The last two lines are the mounted shares:
Filesystem Size Used Avail Use% Mounted on /dev/mapper/VolGroup00-LogVol00 38G 1.7G 36G 5% / devtmpfs 236M 0 236M 0% /dev tmpfs 244M 0 244M 0% /dev/shm tmpfs 244M 4.5M 240M 2% /run tmpfs 244M 0 244M 0% /sys/fs/cgroup /dev/sda2 1014M 87M 928M 9% /boot tmpfs 49M 0 49M 0% /run/user/1000 192.168.33.10:/backups 9.7G 1.2G 8.5G 13% /backups 192.168.33.10:/www 9.7G 1.2G 8.5G 13% /srv/www
To make the mounts permanent on reboot, open the
sudo nano /etc/fstab
and add the following lines:
192.168.33.10:/backups /backups nfs defaults,timeo=900,retrans=5,_netdev 0 0 192.168.33.10:/www /srv/www nfs defaults,timeo=900,retrans=5,_netdev 0 0
To find more information about the available options when mounting an NFS file system, type
man nfs in your terminal.
Another option to mount the remote file systems is to use either the
autofs tool or to create a systemd unit.
Testing NFS Access
Let’s test the access to the shares by creating a new file to each of them.
First, try to create a test file to the
/backups directory using the
sudo touch /backups/test.txt
/backup file system is exported as read-only and as expected you will see a
Permission denied error message:
touch: cannot touch ‘/backups/test’: Permission denied
Next, try to create a test file to the
/srv/www directory as a root using the
sudo touch /srv/www/test.txt
Again, you will see
Permission denied message.
touch: cannot touch ‘/srv/www’: Permission denied
/var/www directory is owned by the
apache user, and this share has
root_squashoption set, which maps the root user to the
nobody user and
nogroup group that doesn’t have write permissions to the remote share.
Assuming that a user
apache exists on the client machine with the same
GID as on the remote server (which should be the case if, for example, you installed apache on both machines), you can test to create a file as user
sudo -u apache touch /srv/www/test.txt
The command will show no output, which means the file was successfully created.
To verify it list the files in the
ls -la /srv/www
The output should show the newly created file:
drwxr-xr-x 3 apache apache 4096 Jun 23 22:18 . drwxr-xr-x 3 root root 4096 Jun 23 22:29 .. -rw-r--r-- 1 apache apache 0 Jun 23 21:58 index.html -rw-r--r-- 1 apache apache 0 Jun 23 22:18 test.txt
Unmounting NFS File System
If you no longer need the remote NFS share, you can unmount it as any other mounted file system using the umount command. For example, to unmount the
/backup share you would run:
sudo umount /backups
If the mount point is defined in the
/etc/fstab file, make sure you remove the line or comment it out by adding
# at the beginning of the line.
In this tutorial, we have shown you how to set up an NFS server and how to mount the remote file systems on the client machines. If you’re implementing NFS in production and sharing sensible data, it is a good idea to enable kerberos authentication.
As an alternative to NSF, you can use SSHFS to mount remote directories over an SSH connection. SSHFS is encrypted by default and much easier to configure and use.
Feel free to leave a comment if you have any questions.